ProSolar Rooftrac太阳能电池板屋顶安装导轨 - ld乐动体育app,乐动体育app下载,乐动esports

完全集成，专利，夹紧RoofTracsystem actually changes the structural properties of the aluminum channel making it significantly stronger. This provides a reliable solar panel mounting system that has a very low profile.

这RoofTrac®太阳能电池板安装系统自上而下roof mounting解决方案设计和制造与安装ler in mind. This innovative design incorporates anodized lightweight aluminum components to allow for maximum transportation and installation efficiency. The lightweight nature of the aluminum rail utilizes thebasic laws of physicsto create结构能力rather than just bulking up the rail in height adding unnecessary and costly aluminum. With this design, the RoofTrac system system holds a very低调的外观that typically outlasts the life of the solar panels mounted to it.

这夹紧系统由组成end clampsand中间夹子to attach the module frame to theRoof Trac support rail。This完全集成的夹紧系统actually changes the structural properties of the aluminum channel making it significantly stronger. This design allows solar modules to be installed at alower profile to the roof, providing a more aesthetically pleasing installation. Module clamps are specifically designed, extruded and engineered for each specific module frame. ProSolar's innovative clamping system provides inward tension on the module frame securing the laminate in the frame.渠道坚果将容易滑入位置以保持端部夹具和中间夹具。

这RoofTrac solar panel roof mountingsystem has been load-tested and engineered to125英里/小时的风装(50 lbs/square foot of pressure load) for most module types. Roof Trac secures the solar panels and prevents damage caused from high-winds and seismic forces. The Roof Trac support rail was designed toconceal all attachment hardware。All connections are made inside the support rail hidden from view. All exposed aluminum is fully anodized to module manufacturer specifications. The Roof Trac rail must be drilled on site for connection to瓷砖Trac.orFast Jackmounting attachments.

RoofTrac with Tile Trac

将屋顶轨道安装到低熔菌

安装人员已经找到了短螺柱TileTrac适用于低调安装在现有的复合瓦片屋顶和RoofTrac。

这patented RoofTrac® rail/clamp system installed with theTileTrac®附件方法为安装在平坦或弯曲的混凝土瓦屋顶上提供了理想的解决方案。Tiletrac降低了破损瓷砖和泄漏屋顶的可能性，使安装人员能够将结构附件制作到屋顶椽子上。安装有Tiletrac®的Rooftrac®允许调整太阳能支撑轨的高度以补偿不均匀的屋顶。

Learn more about洛克马上TileTrac。

屋顶与快速杰克

Mounting RoofTrac Rails to ProSolar FastJack

这patented RoofTrac® rail/clamp system installed with theFastJack®附件方法为需要闪烁的安装提供理想的解决方案。FastJack®也是太阳能行业的首选建筑屋顶附件方法。

FastJack®附件提供了一种快速而强大的安装解决方案。专利设计将螺栓直接放在最大部分支持的支柱柱下。此功能允许标准屋顶闪光灯放在屋顶甲板上。

可拆卸的柱子允许标准闪光灯在底座上滑动而不会损坏精致的围绕构图带状疱疹。

Learn more about洛克马上FastJack。

ProSolar屋顶车Rail Specifications

Standard 1-1/2" Rail

·颜色：清晰阳极氧化和黑色饰面
·UL 2703列出
·提供130英寸（仅限黑色），136“和168”长度
·1-1 / 2“高1-1 / 2”宽
·4 foot on center span
·Engineered and load tested to 45 lb/sq. ft. , equivalent of 125 mph wind speed per 2013 CBC / 2012 IBC / ASCE 7-10 to ensure safety and quality
·Sold in crates of 24 each or 60 each

深2-1 / 2“铁路

·颜色：清晰阳极氧化和黑色饰面
·UL 2703列出
·Available in 124", 136", and 168" lengths
·2-1/2" Tall by 1-1/2" Wide
·6 foot on center span
·Engineered and load tested to 45 lb/sq. ft. , equivalent of 125 mph wind speed per 2013 CBC / 2012 IBC / ASCE 7-10 to ensure safety and quality
·在每个和60个板条箱中销售

XD 3“铁路

·颜色：清除阳极氧化
·UL 2703列出
·提供136“，164”和172“长度
·3“高1-1 / 2”宽
·8英尺在Center Spany withSolarWedge®
·测试和负载测试到30磅/平方。FT，相当于每年110英里/小时的风速，每2013年CBC / 2012 IBC / asce 7-10
·在每个和60个板条箱中销售

屋顶细节

·UL 2703 listed, Class A fire rated, self-bonding, patented racking system
·Typically installed on sloped residential roofs
·采用屋顶裙和屋顶轨道夹紧技术
·4 ft on center span with 1-1/2" tall RoofTrac® rail (6 ft on center with 2-1/2" rail)
·每个标准和深铁系统设计和负载测试到45磅/平方。FT。
（相当于每2013年CBC / 2012 IBC / ASCE 7-10的125英里/小时的风
·专为用于Wavorolar FastJack或Tiletrac附件而设计。